With the development of science and technology, Identical Flash Intense Pulsed Light Therapy Device has gradually become a new choice for beauty lovers with its safe and effective characteristics.
this article will provide you with a simple guide to using the Identical Flash Intense Pulsed Light Therapy Device to help you quickly learn how to use it.
Tips: Read the "Product Instruction Manual" provided by the manufacturer carefully before starting.
procedure
1. Connect the power cord, Turn on the power switch on the back of the console.
2. Turn the emergency stop switch to the right to check if it pops up, and press the start button on the front of the main unit.
3. Enter the password to enter the main interface.
4. Select [Normal Mode] or [Expert Mode] according to the doctor's habits, select the corresponding application type, skin color grade and lesion degree according to the patient's skin condition in the normal mode, and set the energy density, pulse width and other parameters according to the doctor's habits in the expert mode.
5. Replace the appropriate filter and choose whether to install a small light guide crystal according to the treatment area.
6. After the parameters are confirmed, click the "Start" button, and wait for the button to change to "Ready" to start the treatment.
7. Apply the gel to the patient's area to be treated.
8. Aim the handpiece at the area to be treated (it is forbidden to aim at the part of the human body other than the body to be treated, the human eye or flammable objects) and press the switch button on the handset to treat the patient.
9. When you're done, click the "Ready" button to stop the treatment.
10. Press the start button to shut down the system.
11. The power switch is turned off, and the instrument is powered off.
precautions
・Please read the instruction manual carefully before using this product and operate strictly in accordance with the instruction manual.
This product should only be operated by qualified medical personnel and restricted to use in medical institutions.
• Do not aim light at parts of the body outside of the eyes or treatment area when in use.
・Wear special protective glasses when using the Identical Flash Intensive Pulsed Light Therapy Device.
The patient must wear opaque goggles.
・Do not turn on the power when a xenon lamp or handpiece is not connected.
・ There are fragile lenses in the handset, so do not hit or drop them to avoid the lenses breaking.
・Before operating, make sure that the caster brake pads are pressed to avoid the machine moving during operation.
• There is a risk of fire if flammable materials, solutions, or gases are present, or if a strong light source is used in an oxygen-rich environment.
During operation, no personnel should be allowed to enter or leave the operation room or open doors and windows, and a warning sign should be posted in a conspicuous position at the door.
Shut down the machine as soon as the operation is complete.
• Avoid aiming light at reflective objects, such as jewelry, watches, mirrors, etc.
・If this product fails, it must be repaired by a professional designated by the company according to the instructions in the maintenance manual.
・This product should only be used on intact skin and should not come into contact with broken skin and mucous membranes.
eye hazard distance< 20cm.
・Special precautions regarding electromagnetic compatibility (EMC) are required for this equipment, and installation and use must be carried out in accordance with the electromagnetic compatibility information specified in this instruction manual.
・Please use the accessories provided by our company, as the use of accessories not provided by our company may increase the emission or reduce the immunity.
maintenance
1.
In order to ensure the normal operation of this product, it is recommended to clean the main unit and hand tools daily.
Disconnect the power supply of the main unit before cleaning, and take care to avoid liquid seeping into the shell during cleaning.
· Medical alcohol used for cleaning and disinfection should be allowed to evaporate before using an IPL device.
2.Filter cleaning
and remove the filterGently wipe the dust on the surface of the filter with a dust-free cloth.
If the filter is dirty, wipe it with a dust-free cloth moistened with alcohol or isopropyl alcohol, and then wipe with a dry, dust-free cloth until the filter is completely dry.
When not in use, store the filter in the host storage compartment.
3.Sapphire crystal cleaning
・Please wipe the surface of the sapphire with a dust-free cloth stained with alcohol or isopropyl alcohol to ensure that the residual gel is thoroughly removed, and then wipe with a dry dust-free cloth until the sapphire is completely dry.
After drying, the surface of the sapphire should be inspected to ensure that there is no visible residue, otherwise the cleaning procedure should be repeated until there is no visible residue on the surface.
When not in use, store the light guide crystal in the host storage compartment.
common troubles and how to handle
them
